home *** CD-ROM | disk | FTP | other *** search
- Dear Tek Illustrator user,
-
- We are pleased that you have decided to take a look at TommySoftware« Tek
- Illustrator. As you will see, it is well worthwhile.
-
- The TommySoftware« Tek Illustrator is a full-featured technical illustration
- and graphics system for Microsoft Windows Version 3.1. It offers, along with
- many construction possibilities, a particularly user-friendly graphical user
- interface which complies with all Windows standards.
-
- Installation
-
- The installation process is different depending on the way you received the
- TommySoftware« Tek Illustrator. Please make sure to follow all steps
- carefully!
-
- 1. If you received the TommySoftware« Tek Illustrator on disk:
-
- On these disks you can find the TommySoftware« Tek Illustrator in packed
- form. In order to install TommySoftware« Tek Illustrator, start the Windows
- program INSTALL.EXE on the first disk.
-
- 2. If you downloaded the TommySoftware« Tek Illustrator from a BBS:
-
- As you are reading this text, you have succeeded in unpacking the file
- TK31E1.ZIP. You will also require the files located in the archive named
- TK31E2.ZIP.
-
- After unpacking both archives to the same location, you should find at least
- the following files in that location: INSTALL.EXE, INSTALL.WRI and some
- numbered files (about 30 files). In order to install the TommySoftware« Tek
- Illustrator, start the Windows program INSTALL.EXE now.
-
- After the installation, you may delete the files stated above. But before,
- please give a copy of the archives to all your friends! Please make sure,
- however, that you give them all the installation files, and not a copy of
- the installed program. Without a proper installation, the program may not
- work properly on their computer.
-
- Undo Installation
-
- During installation of the Tek Illustrator Shareware Version an entry is
- made in WIN.INI. It is removed automatically, if the Tek Illustrator
- Shareware Version is deinstalled using the Undo Installation command from
- the installation program..
-
- System Requirements
-
- The TommySoftware« Tek Illustrator requires at least the following:
- - Intel 80386 Processor
- - Microsoft Windows Version 3.1 or higher
- - 4 MB RAM available to Windows (not including swap file)
- - Graphics card and monitor capable of displaying 640X480 pixels and
- 16 colors or gray levels.
- - Mouse or other pointing device.
-
- For working with complex drawings and/or imported bitmap graphics, we
- recommend the following:
- - Intel 80486DX Processor
- - Microsoft Windows Version 3.1 in Enhanced Mode
- - 8-12 MB RAM available to Windows (plus a permanent swap file of
- about the same size)
- - Accelerated graphics card and monitor capable of displaying
- 1024X768 pixels and 256 colors.
-
- Addresses
-
- You can reach TommySoftware« at these addresses:
-
- TommySoftware« TommySoftware«
- North America, Inc. Germany
- 130 Barrow Street Selchower Stra▀e 32
- New York, NY 10014 D-12049 Berlin
- U.S.A. Germany
-
- Phone (212) 807 9720 Phone +49 30 621 5931
- Telefax (212) 807 8149 Telefax +49 30 621 4064
- CompuServe 100020,3647 CompuServe 100142,3665
- America Online "TSNA"
- Prodigy "JULE73A"
-
- May 1995
-
-
-